Goped performance parts 

TBR Billet Aluminum Wheels
Super high quality, machined from billet aluminum. Available in blue, black, red, and polished.
$65.00 for set of 2

 

TBR Billet Aluminum Decks
Machined from aircraft quality aluminum. These decks provide premium traction and adds unique style. Available in blue, black, red, polished (Sport & Bigfoot)
$50.00

 

TBR Air Filter Kits
Increase your overall power and improves airflow by 30%. A must for those who are serious about performance.G23, G2D, G23O-RC $22.00GEO
$28.00

 

TBR Handle Bar Kit
Handle bars and billet steering stem kit. Available in 16 or 18 inches. Improve control and strength of your ride just like the Pro’s. $79.00

 

TBR 3rd Bearing Support
Protect your crankshaft from breaking. A must for extreme riders. Available in red, blue, black and polished.
$29.00

TBR Long Drive Spindles
Made from the finest grade stainless steel and made for speed. These drive spindles stand alone when it comes to quality. Sizes available .550,.600,.0625,.650, .0675,.0700,.0725.750,.800 (Sport & Big foot) (Geo Sport) spindles .600-.950
$20.00

 

TBR Billet Aluminum Gas Caps
Machined from the highest quality aluminum. Available in red, blue, black and polished. $25.00
$20.00

TBR Cable Clamp
Made from the highest quality 6061-T6 Billet Aluminum. Predrilled for number plate.
$12.00

TBR Race Pipe
Do you want the best? Run what all the national and world champs are running on their peds. System comes standard with high quality chrome finish and all hardware for an easy installation. $129.00 Sport $129.00 BigFoot and$129.00 GoQuad

 

GSR 40 PIPE
Major perfromance gains with built in silencer, no louder than stock muffler. Available in chrome!
$199.00

GO-PED SILENCERS!
Make your neighbors happy by quieting down your Go-ped with one of our Go-ped silencers. Will fit Race pipe or stock exhaust.
$45.00

X-CAN, Q-CAN & X-PORT
X-Can- Finally a muffler that not only gives you great low end and extra top speed it also looks great too! Tests have shown an increase of over 1000 RPM’s wich can mean a 2-3 MPH gain depending on spindle size. It’s a 2 piece billet aluminum muffler made of 6061 T-6 aircraft aluminum with two stingers that lock into place with included o-rings. Machined into it is a heat sink header that not only reduces temperature, but adds a “header” effect more like a tuned pipe for better low end. The stingers can be cut to a tuned length and also raised into the muffler to change performance. Great for the guy that does street freestyle and does not want the heat and weight of a tuned pipe. Can be used with any Go-Ped with any motor and with G-23′s there is no need to do any cutting of your plastic engine cover. Add the X-Port for even more low-end performance.

Q-Can- The new Quiet can is as quiet as a stock G23 and G23-ORC exhaust can with much more performance. The Q-can uses an array of baffles inside to restrict noise at the same time allowing for maximum air flow. Must use (X-Port to connect to stock exhaust tube)

$80.00 X-CAN

$85.00 Q-CAN

$90.00 X-CAN V2

$138.00 GSR X-CAN

$30.00 X-PORT

 

TBR HP Carb Kits
Get another couple miles per hour and quicker acceleration out of your motor with this little gem. Easy install with no cutting because of our specially designed billet intake manifold.
Kit includes: Carb, Hand Ported Billet Manifold, Throttle linkage, Throttle Bracket, Spring, Nut, and High Temp Teflon Gasket.

G23 & G2D HP CARB KIT $70.00

GEO HP Carb Kit $76.00

GSR HP Carb Kit $80.00

TBR Race Ported Big Bore kit (G23/G23 RC)
Includes:
(1) 27cc or 29cc Cylinder
(1) 27cc or 29cc Cut Piston
(1) 27cc or 29cc Piston ring
(1) Base gasket
(1) Piston pin
(1) Piston Pin clip set
(1) Spark plug (NGK CMR7H)

(Greater reliability with TBR cut piston over stock)

$68.00 27cc $109.00 29cc

HP Ported Geo Cylinder
Enjoy one of the most well engineered ported cylinders to date. This is the first of it’s kind and is sure to add top and bottom end to your Geo Motor. This simple bolt on Mod will show you the true performance of the Geo-Motor.

$80.00

29cc Big Bore Billet Head Kit
(Fits G23, g23 rc)

Gain more torque and speed with this. The race ported Billet head cylinder that is sure to make your motor come alive. Gain extra cooling, strength and performance.

$129.00

G23O-RC 25cc Big Bore PistonG23 Piston Ring SetG23 Piston Thrust Washer Set

G23 Piston PinG23 Piston Clip SetG23 Piston Pin Bearing

HP Piston Kits
All Kits Include:
Piston, Pin, Rings, Bearings, Clips and Washers.

G23LH Piston kit $26.00

G23ORC Piston kit $29.00

27cc Piston kit $30.00

29cc Piston Kit $36.00

29CC Chrome Engine With Billet Cylinder Motor
Complete motor designed for increased performance, including better fuel burn and engine cooling. A must for any racer looking for that extra edge!

$299.00

NEW! G23ORC Motor

The new Zenoah G23RC engines are here! This completely re-designed engine offers outstanding performance. It has a new 4 transfer port cylinder, larger carb with choke, lightened flywheel, re-designed combustion chamber, new crankshaft and many other changes. This is the new motor to be on all Super X Peds and Big Foots.

$269.00

 

 

GOPED TIMING KEY
Includes flywheel puller bolt. Advances ignition timing 10 degrees. Increases acceleration and gain up to 2mph on top speed.

Fits:Bigfoot – Go-Quad – Liquimatic – Sport – Martin Mini – HE23ZR/G23LH Engine – G2D Engine

$9.00

 

 

TBR Steel FTG
Ride Hard and Feel safe and secure with this item. You don’t have to worry about a broken FTG anymore.
$20.00

TBR Billet Finger Throttle

Replace your stock plastic throttle with one of these high quality 6061-T6 Billet aluminum finger throttles. $20.00

TBR Billet G23 & G230-RC Fan Cover

No more broken fan covers. Ride hard and feel safe with one our TBR billet fan covers.

(Does not include air scoop)

$35.00

TBR Air Scoops
Keep your engine cooler and make more horsepower with one of these billet air scoops.
BLOWOUT! $10.00

G23 Now $25.00

BIG FOOT BILLET WHEELS
Replace your plastic wheels with these polished Big foot billet wheels. Add strength and style to your ride.

$120.00

GSR40 Chain Tensioner
Any GSR40 or TSI model. Does not interfere with pipe brackets

The chain tensioner is made from solid billet aluminum and incorporates a tensioner along with an innovative 3rd bearing support. Other tensioners work by over applying pressure to the chain while the this unit has a ball bearing sprocket that keeps the chain at proper tension and alignment. In addition support to the small drive sprocket in order to reduce the chances of shearing the sprocket and uneven wear on the clutch bearing. Fits all GSR’s and TSI units with off road or street tires.

$120.00